RNX-N4
RNX-N4
Product Photos
MSRP:
$130.00
  • 14x speed and 6x coverage over wireless G .
  • Faster UBICOM CPU for better video streaming , downloading files and online gaming at the same time.
  • Stream Engine Inside. Automatically detects media applications and gives them priority on the network.
  • Hardware and software combination to improve the quality of media for your network.
  • x4 built-in high performance Vitesse chipset 10/100/1000Mbps Gigabit Switch Ports (Auto-Crossover)
  • x3 high gain Omni directional 2 dBi antenna connecting for the best wireless signal.
  • Cool blue LED indicator shows the status of your network.
  • Quick hardware button for WPS setup to enhance the security.
  • Easy setup with Wi-Fi Protected Setup (WPS).
  • Security support WPA/WPA2 (AES, 64,128-WEP with shared-key authentication).
  • 802.11b/g/n 2.0 provide further coverage, less dead spot and higher throughput.
  • MIMO technology thourghput up to 300 Mbps for Ralink 2T3R solution.
  • Supports MIMO technology with 3 external 2 dBi SMA Antennas
  • Support Cisco CCS V1.0, V2.0 and V3.0 compliant WPS.
  • Wireless Multimedia Enhancements Quality of Service support (QoS) with power saving for Dynamic Networking
  • RNX-N4 is also fully compatible with all other IEEE 802.11b/g devices.
  • Supports DNS/ DDNS/ NAT/ hide SSID/ WDS/ Filter Scheduling/ Real time alert/ QoS/WMM
  • Firewall supports Virtual Server Mapping, DMZ, IP Filter, ICMP Blocking, SPI.
  • Support 802.1x authenticator, 802.11i (WPA/WPA2, AES), VPN pass-thru mechanisms.
  • Universal Plug and Play (UPnP™)
  • Web configuration compatible with both IE and Firefox.
  • VPN: VPN pass-through (PPTP, L2TP, IPSEC)
  • ** Important notice:
  • 1. You must reboot both the router and your house modem (from your ISP) after the first time you setup the router. After that, your modem can detect the new setting and works correctly.
  • 2. Older PC/NB may have problems connecting (slow or fail to open the network) with RNX-N4/N4PS. This is due to a driver issue of your wireless client trying to connect to new N router. Please update the wireless driver of your PC/NB to solve this issue.
  • RNX-N4 is a gaming router which is not design for a used of wireless bridge.
    It can only establish a bridge by wired instead of wireless.
  • **Maximum wireless signal rates referenced to IEEE Standard 802.11 specifications. Actual data throughput speed will vary depending by network conditions and environments, such as network traffic, building materials, local radio frequency interference, and other conditions.